ILIFE Robot Vacuum Not Charging – 10 Steps To Revive Charging

Photo of author
Written By John Paul

John Paul is a tech enthusiast dedicated to troubleshooting. He is passionate about fixing glitches, simplifying complexities, and empowering others in the digital realm.

Robot vacuum cleaners have become a valuable addition to our homes, providing convenience and efficiency in keeping our floors clean.

One of the remarkable features of these robots is their ability to autonomously seek out their charging docks when the battery runs low, ensuring they’re always ready for action.

While this concept is impressive, we understand that not everything always goes according to plan, and sometimes these amazing robots can even encounter charging hiccups

This article is for providing solutions to resolve this frustrating ILIFE Robot Vacuum not charging hiccups.

How to Resolve ILIFE Robot Vacuum Not Charging?

The following steps will guide you through the troubleshooting process, helping you identify and resolve the issue effectively.

Let’s get started!

1. Check the Charging Cable

First and foremost, when your ILIFE robot vacuum is not charging, inspect the charging cable that connects the charging dock to the power outlet:

Step Action
1. Examine the charging cable for any visible damage, including frayed wires or loose connections.
2. Make sure the cable is securely plugged into both the charging dock and the power outlet.
3. If you find any issues with the cable, such as exposed wires or a damaged plug, consider replacing it with a new, undamaged cable.

ILIFE Robot Vacuum Not Charging 10 Fixes - Infographic

Also Read: Shark Robot Not Connecting To Wi-Fi? 12 Simple Ways To Fix It

2. Ensure the Power Switch Is On

The next step is to ensure that the power switch on the vacuum is turned on.

It may sound simple, but sometimes a minor oversight like this can cause the issue. After confirming that the power switch is on, proceed to the next step if the problem persists.

A man holding ILIFE Vacuum Robot in hand with a side image of the power switch turned to on


3. Power Cycle Your ILIFE Robot Vacuum

If the power switch is already on then, try power cycling your robot vacuum. It can sometimes reset minor glitches and reestablish the charging connection.

It includes power cycling the robot and the charging dock.

For the power cycling Robot follow the steps below:

  1. Turn off the power switch button on the robot.
  2. Wait for a few minutes.
  3. Then turn it back on.

For the power cycle of the charging dock, you have to:

  • Unplug it from the power outlet
  • Then, wait a few minutes
  • After a few minutes Plug it back into the outlet

If the vacuum still doesn’t charge, proceed to the next step.

Unplugged ILIFE Robot Vaccum


Quick Read: Lefant Robot Vacuum Not Charging – 7 Steps To Fix It

4. Clean the Charging Contacts

Now, consider examining the charging contacts, one of the most important components of the entire charging process.

Unfortunately, they become dirty or corroded over time, potentially causing charging issues.

Gently clean the charging contacts on both the vacuum and the dock with a soft, dry cloth or a cotton swab dipped in rubbing alcohol.

If cleaning the contacts doesn’t resolve the issue, move on to the next step.

5. Test the Power Outlet

A faulty power outlet can also prevent your robot vacuum from charging.

Plug another device into the same outlet to confirm that it’s providing power or use a multimeter (if available) to check the power source functionality.

If the outlet is working correctly and the vacuum still won’t charge, proceed to the next step.

A man testing power outlet with a multi-meter which is showing 119.2V reading


6. Watch for Vacuum Overheating

Sometimes, charging problems with your robot vacuum can be linked to overheating, so it’s worth considering this possibility.

Here’s how to go about it:

Touch the robot vacuum after it has completed a cleaning session. If it feels excessively hot to the touch, it might be overheating.

This could happen if the vacuum has been working for an extended period or if it’s operating in a particularly warm environment.

If you suspect overheating, the best thing to do is to let the vacuum cool down naturally. Turn it off, unplug it from the charger, and find a well-ventilated area to place it in.

Giving it some time to cool off allows the internal components to return to a safe operating temperature. Once you’ve allowed for sufficient cooling time, try charging the vacuum again.

ILIFE Robot Vacuum with high temperature icon on wooden floor

People Also Liked: ECOVACS DEEBOT Not Charging – Effective Troubleshooting & Fixes

7. Check the Power Adapter

To further proceed in addressing the charging issues with your robot vacuum, it’s important to thoroughly examine the power adapter.

The following table will tell you how to troubleshoot adapter-related concerns:

# Steps to Perform
1. Inspect the power adapter for damage, loose connections, or wear.
2. If the adapter is suspected, find a compatible one with matching voltage and current ratings.
3. Replace the original adapter with the compatible one and check if the vacuum charges.
4. If it charges with the new adapter, the original adapter may need replacement.

8. Perform Factory Reset

Another step to address the charging issues is to factory reset the device.

This step will erase all the information stored on the device, including maps and other mode settings you may have configured for your cleaning sessions.

There are two ways to perform this reset. Let’s take a look at the methods one by one

Manual Factory Reset:

To perform the manual reset you have to use the button present on the robot, here’s how to proceed:

1. Power off the robot:

  • Locate the power button on your ILIFE robot vacuum. It’s usually on the top or side of the device.
  • Press and hold the power button for several seconds until the robot turns off completely. You may hear a beep or see lights turn off to indicate it’s powered down.

2. Disconnect from power:

  • If the robot is on a charging dock, remove it from the dock.
  • If it’s not on a dock, unplug the charging cable from the robot itself.

3. Wait for 10 seconds:

  • This brief pause allows the robot’s internal systems to fully reset.

4. Power on the robot:

  • Press and hold the power button again for a few seconds until the robot turns on. You should hear a beep or see lights turn on to indicate it’s powered up.

5. Reconnection (optional):

  • If you want the robot to resume charging, place it back on the charging dock or plug the charging cable back into the robot.

Factory Reset Using the ILIFE App:

To perform a factory reset by using the ILIFE App,

Certainly, here are the streamlined steps to perform a factory reset on your robot vacuum:

  • Open the ILIFEHOME App and find the “Factory Reset” option in the settings or advanced settings.
  • Select this option. It will start the reset
  • After the reset, set up your vacuum as if it were new, including Wi-Fi settings and schedules.
  • Test if the charging problem is resolved.

You Might Also Like: Shark Robot Vacuum Not Charging? Here’s What You Need to Do

9. Consider Changing the Battery

If your ILIFE robot vacuum is still not charging, it might be a sign that the battery is at the end of its lifespan.

A lithium-ion battery typically has a lifespan of 3 to 4 years. If your battery is at this age, battery replacement should be considered.

Over time, batteries can degrade, and this can affect their ability to hold a charge.

ILIFE Robot Vacuum Battery Replacement

By following these straightforward steps listed below, you can easily perform the battery replacement process:

  1. Remove the two screws on the battery cover.
  2. Take off the battery cover.
  3. Loosen the cable terminal.
  4. Take out the old battery.
  5. Connect the cable terminal to the new battery.
  6. Place the new battery flatly in position.
  7. Align and secure the battery cover.
  8. Tighten the two screws to secure the battery cover.

10. Resolve Motherboard Issues

If none of the previous steps have resolved the charging problem, there might be a motherboard issue with your robot vacuum.

This would require professional diagnosis and repair, so contact the manufacturer or a qualified technician to assess and potentially replace the motherboard.

Our Popular Picks: 



1. Why is my ILIFE vacuum not charging?

If your iLife vacuum is not charging, ensure the power source is functioning correctly and the charger is plugged in correctly. Check the charging contacts on the vacuum and the docking station for dirt or debris, as this can obstruct charging.

If the problem persists, it might be a battery or charger issue that requires professional repair or replacement.

2. How do I reset my ILIFE robot vacuum?

To reset your ILIFE robot vacuum, follow these general steps:

  1. Turn off the vacuum.
  2. Press and hold the power button for 10-15 seconds until you hear a beep or see some indication that it’s resetting.
  3. Release the button and wait for the vacuum to restart.

3. Why is my ILIFE V55 Pro not charging?

If your ILIFE V55 Pro is not charging, check the charger and power source for proper functionality. Inspect the charging contacts on both the vacuum and the docking station for dirt or debris.

4. How do I change the battery in my ILIFE vacuum?

Replacing the battery in an ILIFE vacuum can be complex and may void your warranty if done improperly. Refer to the user manual for your specific model or contact customer support for guidance on battery replacement.

5. How do I know if my robot vacuum is charging?

Most robot vacuums have indicator lights that show the charging status. When the vacuum is charging, you should see a light or indicator on the charging dock or the vacuum itself.

6. How do you manually charge a robot vacuum?

If your robot vacuum doesn’t automatically dock and charge, you can manually place it on the charging dock. Ensure it aligns with the charging contacts on the dock, and once properly placed, it will start charging if it has a low battery.

7. How long does the ILIFE battery last?

The battery life of ILIFE robot vacuums can vary depending on the model and usage. On average, you can expect a runtime of 1 to 2 hours per charge. More advanced models may have longer battery life.

8. Why does my ILIFE robot beep while charging?

Beeping while charging can indicate various things, including a connection issue with the charger, a fault in the charging circuit, or it may be a normal part of the charging process.

Consult your vacuum’s manual for information on what the specific beeps mean, and if it’s abnormal or persistent, consider contacting ILIFE customer support for assistance.

Leave a Comment