Bushnell Wingman Not Charging – Try These Solutions

Step	Description
1.	Ensure the cable is properly plugged into a power source and the Wingman.
2.	If the cable feels loose, try plugging it in again or use a different cable.
3.	Inspect the cable for any signs of damage or fraying.
4.	If you’re using a third-party charging cable, make sure it is compatible with your Wingman

2. Check the Charging Port

After ruling out the charging cable-related issues, the next thing to check is the charging port. The charging port is on the bottom of your Bushnell Wingman device and can become dirty or damaged over time.

1. Look for Any Blockage or Dirt:

• Inspect the charging port for any dirt or debris blocking the connection.
• Use a soft-bristled toothbrush to clean the port and remove any obstructions gently.
• Ensure the port is completely clean before attempting to charge your Wingman again.

2. Inspect the Charging Port for Any Damage:

• If the charging port is damaged, contact Bushnell customer support for assistance.
• Get guidance on how to repair or replace the charging port or advise on the best action.
• Avoid attempting any repairs on your own, as this may further damage your Wingman and void your warranty.

3. Reset the Wingman

If your Bushnell Wingman is still not charging after checking the charging cable and port, the next step is to try resetting the device.

Resetting your Wingman can sometimes fix any software-related issues that are preventing it from charging.

Here’s How To Do It:

Step	Description
1.	Locate the reset key, a small opening to the right of the USB charging port.
2.	Take a small pin or paperclip and gently press it into the reset key, applying light pressure.
3.	Hold down the reset key for approximately 2 seconds or until the LED Indicator Ring turns off.
4.	Release the reset key after the LED Indicator Ring has turned off.
5.	Your Wingman has now been reset.

You May Like To Read:

• Ortizan Speaker Not Charging – 7 Quick & Easy Fixes
• How To Fix Bose Soundlink Not Charging – Try These 8 Solutions

4. Update Firmware

Updating the firmware on your Bushnell Wingman can also help fix issues related to charging. Firmware updates can improve the overall performance and stability of the device, including its charging capabilities.

Step	Description
1.	Connect your Wingman to your computer using a USB cable.
2.	Visit the Bushnell website and locate the firmware update for the Wingman.
3.	Download the latest firmware update to your computer.
4.	Follow the instructions provided by Bushnell for installing the firmware update on your Wingman.
5.	Ensure you carefully follow the instructions to avoid any issues during the update process.
6.	Wait for the update process to complete.
7.	Once the firmware update is finished, disconnect your Wingman from the computer.
8.	Power on your Wingman and verify that the firmware has been successfully updated

If the update was successful, your Wingman should now be charging properly. If not, it’s possible that there may be a hardware issue with the device that requires repair or replacement.

Addition Resource: Checkout Bushnell Wingman Full Setup and Review

5. Replace the Battery

If you’ve tried all other troubleshooting steps and your Wingman is still not charging, a battery replacement may be the best option to get it up and running again.

Over time, batteries can wear out and lose their ability to hold a charge. The Bushnell Wingman has a non-replaceable battery. This means that the battery cannot be removed and replaced by the user.

If the battery dies, the device will need to be sent to Bushnell customer Service, or an authorized repair center.

Here are some tips for extending the battery life of the Bushnell Wingman:

• Turn off the device when you are not using it.
• Do not leave the device in direct sunlight.
• Do not store the device in extreme temperatures.

Popular Post: Beats Solo 3 Not Charging – Troubleshooting Your Headphone Instantly

FAQs

1. How to charge my Bushnell Wingman?

To charge your Wingman, connect it to a power source using the provided USB cable. Ensure the cable is properly plugged into both the device and the power source.

2. Why is my Wingman not charging?

There could be various reasons, such as a loose connection, a damaged charging cable, an incompatible power source, or a dirty charging port.

Refer to the troubleshooting steps mentioned earlier in this article to identify and resolve the issue.

3. Can I use a different charging cable with my Wingman?

While it’s recommended to use the original charging cable provided by Bushnell, you can use a compatible third-party cable.

Ensure that the cable is designed for charging and data transfer and is compatible with your Wingman.

4. How long does it take to fully charge the Wingman?

The charging time may vary depending on the remaining battery level and the power source’s output.

On average, it takes around 2-3 hours to fully charge the Wingman.

5. Can I charge my Wingman using a power bank?

Yes, you can charge your Wingman using a power bank as long as it provides sufficient output power.

Ensure the power bank is fully charged and compatible with Wingman’s charging requirements.

6. How can I clean the charging port of my Wingman?

Use a soft, dry cloth or compressed air to gently clean the charging port. Avoid using any liquid or sharp objects that may cause damage.

7. What should I do if the charging port is damaged?

If the charging port is damaged, it’s recommended to contact Bushnell customer support for assistance. They can guide you on repair or replacement options and ensure proper handling.

8. Can I charge my Wingman while playing music?

Yes, you can charge your Wingman while playing music. However, note that charging may take longer if the device is simultaneously performing power-intensive tasks like playing music.

9. Is it normal for my Wingman to get warm while charging?

It’s normal for electronic devices, including the Wingman, to generate some heat during charging.

However, if the device becomes excessively hot or shows signs of overheating, disconnect it immediately and contact Bushnell support.

10. Why is my Wingman not turning on after charging?

If your Wingman doesn’t turn on after charging, ensure that it has been charged for a sufficient amount of time.

If the issue persists, try a different charging cable or power source. If none of these steps work, contact Bushnell support for further assistance.

11. Can I charge my Wingman using a wall adapter?

Yes, you can use a wall adapter with a USB port to charge your Wingman. Ensure that the adapter provides the appropriate output power and is compatible with the device.

12. What should I do if none of the troubleshooting steps work?

If none of the troubleshooting steps resolve the charging issue, it’s best to reach out to Bushnell customer support for personalized assistance.

They will be able to guide you through advanced troubleshooting or provide further instructions to address the problem.

Conclusion

In conclusion, experiencing charging issues with your Bushnell Wingman can be frustrating, but by following the steps outlined in this article, you can effectively troubleshoot and resolve the problem.

Checking the charging cable, inspecting the charging port, resetting the device, and updating the firmware are all essential steps to ensure proper charging functionality.

Remember to handle the Wingman with care and reach out to Bushnell customer support if the issue persists or if you require further assistance.