Beats Solo 3 Not Charging – Troubleshooting Your Headphone Instantly

Are you having trouble getting your Beats Solo 3 headphones to charge? Don’t worry- you’re not alone. Many users have reported that their headsets are no longer charging, and it can be a frustrating problem.

In this article, we’ll walk through the most common causes of Beats Solo 3 not charging and provide simple troubleshooting steps you can take to get your headphones back up and running in no time

 

1. Restart Your Beats Solo 3

The first step to try when your headset won’t charge is to restart it. This can often help reset any minor connection issues, so it’s worth a shot! To do this, press and hold the power button for 10 seconds until the LED indicator light turns off.

Then plug your headphones into a power source and see if that does the trick.4

2. Reset Your Headphone

If restarting your headset doesn’t do the trick, try resetting it to its default settings. This can help resolve any firmware issues that may be preventing your headphones from charging properly.

To do this, press and hold both the Power and Volume Down buttons at once for 10 seconds until you see a flashing light on the Fuel Gauge. Your Solo 3 will now be reset to its factory settings time to give charging another go!

3. Check Your Charger

If restarting doesn’t work, the next thing to do is check the power source you’re using. Over time, chargers can lose their efficiency and struggle to supply enough power for the headphones to charge properly.

To determine whether the charger is indeed at fault, plug your Beats Solo 3 into another wall outlet using a different charger. If they start charging without any issue, then it’s likely that the original charger has become outdated or defective.

Also, ensure you’re using an Apple-certified adapter (such as one from the Beats Solo 3 charging kit) and not a generic third-party option.

4. Test Your Charging Cable

Along with the adapter, make certain that your cable is intact and functioning properly. Over time, cables can also become worn down or frayed, preventing them from charging your headphones.

Test them with another device or use another cable to see if your headphone starts charging. If they’re not working properly, replace them with genuine Beats.

5. Clean Your Headphone’s Charging Port

Another possible cause of your Beats Solo 3 not charging could be dirt or debris in the headphone’s charging port. To clean it out, use a cotton swab dipped in isopropyl alcohol to gently wipe away any buildup.

Just make sure you don’t insert the swab too far into the port as this can damage it! Then, try plugging your headphones back in and see if they charge correctly.

6. Update The Firmware

If none of the above steps work, it may be time to update the firmware on your headphones. Irrespective of whether you are using Windows, Mac, or Android, the process remains straightforward and hassle-free.

For Windows and Mac Users:

• To begin with, plunge the headphones into your computer using a USB cable.  Then head to the Beats Updater website, and download and install the Beats Updater application.
• Once installed, launch the app and follow the on-screen instructions to update your Beats Solo 3 firmware.

For Android Users

• On your Android phone download the Beats app from the Google Play Store.
• Once installed, open the app and connect your headphones via Bluetooth. The app will then guide you through the firmware update process, resulting in the successful resolution of the battery charging issue.

Once complete, try plugging in your Solo 3 again and see if that did the trick!

7. Check The Room Temperature

There’s a simple hack you might have not considered: check the temperature of the room. You see, temperature greatly impacts the charging capacity of the Beats Solo 3 battery.

When the room temperature is too hot or too cold, your battery might not charge entirely or even at all. To ensure that you can continue grooving to your much-loved playlists without any interruptions, always ensure that the room temperature is within a moderate range while your headphones are charging.

8. Look At Your Headphone For Water Or Sweat Damage

Inspect your headphones for any water and sweat damage. This could be indicative of a battery issue that cannot be resolved even after several attempts to charge your Beats Solo 3.

Luckily, several solutions can help restore the functionality of your headphones.

• Firstly, inspect the charging port for any signs of moisture, debris, or damage. If you spot any, gently clean the port with a soft, dry cloth or a cotton swab.
• Another useful method is to use a hairdryer on low heat, targeting the charging port and other possible entry points for moisture.
• Lastly, consider placing your headphones in a well-ventilated area, or even a container filled with uncooked rice, to allow any trapped moisture to evaporate.

9. Check And Replace The Battery

If all else fails and your Beats Solo 3 still not charging, it’s time to check the battery. Over time, the battery in your headphones can eventually become depleted and may be unable to hold a charge.

The best option here is to replace the battery with an original Beats part. This process requires some technical skill so here are some steps:

1. First, gently remove the ear pad to reveal the screws underneath.
2. Remove these screws to access the battery compartment.
3. Take out the old battery, ensuring to unplug the connector carefully.
4. With a new, compatible battery in hand, plug it in and place it in its designated slot.
5. Finally, reassemble the headphone by screwing back the ear pad and enjoy the revitalized audio experience on your Beat Solo 3.

Source

10. Check If There Is Any Physical Damage

You should check to see if there is any physical damage to your Beats Solo 3 headphones. If you have dropped them recently or noticed any damages, it could be causing the battery not to charge properly.

• For instance, carefully examine the charging port and see if there are any bent or broken pins, as these can impede the charging process.
• Additionally, check for any frayed or damaged wiring, as a broken cable can be at fault for disrupting the flow of electricity from the charger to the battery.
• Moreover, closely examine the earcup and hinge area for any noticeable cracks or breakage, as these seemingly minor damages could impact the internal components responsible for battery charging.

So, the next time you find yourself staring at an unresponsive pair of headphones, remember to conduct an in-depth examination to uncover any hidden physical flaws.

Final Thoughts

We hope by following these simple tips, you can easily solve battery charging issues on your Beats Solo 3 headset in no time! Keep in mind that if none of these tips work, it may be time to replace your headphones.

But before you do so, make sure to check the warranty information for any possible repairs or replacements. Contact the Apple Support team for further assistance.